Akiles Binding Machines & Office Products

The MegaBind is a reliable and easy-to-use comb binding machine. With fully disengaging dies, this binding machine gives you the control for precise binding that you need. The MegaBind I features an adjustable side guide which allows you to align the paper for the best punch. This comb binder can bind up to two-inches of paper (425 sheets of standard paper).

The WireMac manual punch and wire binder comes in either a 2:1 (2 holes per inch) or 3:1 (3 holes per inch) model. The two handle design improves wire binding efficiency. Independantly disengaging dies prevent half punched holes and allow precise punching every time.

The new WireMac-Duo takes the best features of 2:1 (two holes per inch) and 3:1 (three holes per inch) pitch wire binding and combines them in one single machine. In the past, you had to pick which method of wire binding to go with. The WireMac gives you both.

Quickly and effortlessly coil bind documents, reports and more with the CoilMac-ECI spiral binding machine. The CoilMac-ECI not only punches up to 17 sheets of paper at a time, but it also has a built-in coil inserter. Most models in this price range require that you insert coils by hand. The CoilMac-ECI has five disengaging dies that allow for more precise binding.

Quickly create professionally bound documents, reports and more with the easy-to-use Akiles WireMac-E.

Give your reports and books a professional look with the easy-to-use Akiles CoilMac EPI coil binding machine.

The OffiBind comb binder offers an inexpensive option for entry-level binding. It quickly binds books and makes comb binding practical and easy. The OffiBind is ideal for Offices, small binderies & copy centers, home-offices, teachers, students, etc.

The Akiles Diamond-1 corner rounder is an effective and quick way to cut corners off of paper. This paper cutter can work with a stack of paper up to 0.4-inches thick. Several different cutting dies are available for different radii. Radius sizes range from 1/8-inch to 3/8-inch. This corner cutter is very easy to use, easy to change the die and requires little training.

If you are binding large amounts of books, or just need a stand alone comb opener, the Akiles CBM650 heavy-duty comb opener is just what you need. This machine can be used as a stand-alone unit or in conjunction with the CombMac-24E, DuoMac and VersaMac. It is also capable of being used by right or left-handed individuals.

Its independent heat and motor control system allows it to be left on stand-by (heat ready) for hours at a time without depreciating the motor, yet you can instantly re-start laminating. The Akiles Pro-Lam 100 is a high-quality, high-volume pouch laminator. This laminator has a four-inch width and is ideal for use with certificates, reports, luggage tags, business cards, ID cards and more. The four-roller lamination system provides a clear, professional finish.

The Akiles Roll-@-Blade 1815 18" rotary cutter is a high-precision trimmer featuring an ergonomic blade carriage and a self-sharpening tungsten steel alloy blade. Designed with two sliding poles give the Roll-@-Blade exceptional stability and cutting accuracy. It comes with a extra-large work area measuring 15" wide with a printed grid with both metric and standard rulers for easy alignment of your work material. The Roll-@-Blade also features a transparent clamping bar for added visibility when cutting.

The RubiCoil coil binding machine is an excellent entry-level spiral binderA few of the features the RubiCoil has are hardened Steel Dies for a clean and precise punch every time, side margin guide to evenly center the document and a "U" shaped handle that maximizes punching strength, for effortless perforation.

This laminator has steel gears for strength and durability and four-rollers for precise lamination. The Akiles Ultralam 250 laminator is built with quality in mind. The Ultralam 250 has two separate switches for the motor and the temperature, allowing laminator to be left on stand-by (heat ready) for many hours and still instantly re-start laminating when needed. This laminator is able to laminate all standard pouches of various thickness, composition or melting point. The Ultralam 250 is great for use with ID cards, luggage tags, business cards, certificates, letters and cards.

The Akiles Pro-Lam 230 pouch laminator has a heavy-duty motor, metal gears, silicone rollers, a metal cover and extruded aluminum heat plates. Its independent heat and motor control system, allow it to be left on stand-by (heat ready) for hours at a time, without depreciating the motor, yet you can instantly re-start laminating. The four-roller lamination system provides a clear, professional finish.

With the option of either 2:1 pitch (2 holes per inch) or 3:1 pitch (3 holes per inch) binding, the OffiWire can fill your wire binding needs inexpensively.

The Akiles Pro-Lam 320 has a heavy-duty motor, metal gears, silicone rollers, a metal cover and extruded aluminum heat plates. Its independent heat and motor control system, allow it to be left on stand-by (heat ready) for hours at a time, without depreciating the motor, yet you can instantly re-start laminating. The four-roller lamination system provides a clear, professional finish. The Akiles Pro-Lam 320 has a 12 ½" lamination width and can laminate a pouch up to 10-mil thick.

The MegaBind II offers comb binding and 19 ring Spiral-O double loop wire binding in 1 machine. The MegaBind II can punch up to 20 sheets at a time.

Pouch lamination has never been easier with the Akiles ProLam Plus 330 laminator. It is compact, fits on any table and can be used by anyone.

The Akiles Roll-@-Blade 3615 36" rotary cutter is a high-precision trimmer featuring an ergonomic blade carriage and a self-sharpening tungsten steel alloy blade. Designed with two sliding poles give the Roll-@-Blade exceptional stability and cutting accuracy. It comes with a extra-large work area measuring 15" wide with a printed grid with both metric and standard rulers for easy alignment of your work material. The Roll-@-Blade 36" also features a transparent clamping bar for added visibility when cutting.

The CoilMac-M is a well-built manual coil punch. This machine includes five disengaging punches that allow for precise punching. A side margin control allows you to punch deeper into paper, preventing documents from tearing out of bound books. Once coils have been inserted into the paper, coil crimping pliers must be used to cut excess coil and prevent the coil from unwinding.

The Akiles CoilMac-M Plus coil binding machine is very convenient, compact and easy to use. It keeps things running smoothly. This machine is tough, made from metal components. Akiles makes machines designed to last for years on end. All 54 of the punching dies can be disabled, eliminating half-punched holes and making it easier to bind odd-sized documents. The CoilMac-M Plus also punches oval-shaped holes, which are easer for inserting the spiral binding elements.

The affordable Akiles Finish-@-Coil M has an electric motor that quickly spins coils through pre-punched holes. A see-through compartment holds coil crimping pliers that can be used to cut and crimp excess coil. This machine is compact and very easy to use.

The Akiles CoilMac ER is a fully featured, heavy-duty manual punching coil machine, with a built-in electric coil inserter. It is the ideal partner for mid-volume workloads.

Professionally laminate photographs and other materials with your own professional Akiles Pro-Lam Photo laminator. This laminator can be used with confidence for laminating photographs and other sensitive documents.

Keep your spiral binding operations quick and simple with the CoilMac-ER Plus coil binding machine from Akiles. This machine is durable and made from solid metal parts. All 54 of the punching dies can be disabled, eliminating half-punched holes and making it easier to bind odd-sized documents.

Speed up your spiral binding work with the Akiles Finish-@-Coil E1 spiral inserter and crimper. This machine is great for medium to high-volume work. This machine quickly spins the spirals through the punched holes in seconds, after which it crimps off excess coil, preventing the spines from spinning back out.

The Akiles CoilMac-ECI just got better with the introduction of the CoilMac-ECI Plus! This machine is easy to use, highly durable and continues the quality line and history Akiles offers. This machine punches and inserts coils. Unlike other comparable models. The CoilMac-ECI plus punches oval-shaped holes in a 4:1 pitch, which can increase coil insertion time by up to 50%!

MegaBind-1E includes many convenient features such as adjustable margin depth, disengaging die pins, side margin control and more.

The Akiles CombMac-24E binding machine includes everything you need to bind a book except the paper and combs. It is very easy to set up and can be used by anyone.

The Akiles Bookletmac Booklet Maker has simple controls and size adjustments that any employee can use. Prepare up to 800 64-page booklets an hour. Buy your semi-automatic Bookletmac now!

This Akiles CoilMac-EPI is easy to use, highly durable and continues the quality line and history Akiles offers. This machine, by means of an electric motor, punches and inserts coils in a matter of seconds. The CoilMac-EPI plus punches oval-shaped holes in a 4:1 pitch, which can increase coil insertion time by up to 50%! It also has 54 disengageable punching dies!

In order to make large volumes of documents with round corners, the Akiles Diamond 5 is one of the best options. Make professional looking presentations and booklets on a large scale.

The Akiles Roll-@-Blade 1815 18" rotary cutter is a high-precision trimmer featuring an ergonomic blade carriage and a self-sharpening tungsten steel alloy blade. Designed with two sliding poles give the Roll-@-Blade exceptional stability and cutting accuracy. It comes with a extra-large work area measuring 15" wide with a printed grid with both metric and standard rulers for easy alignment of your work material. The Roll-@-Blade also features a transparent clamping bar for added visibility when cutting.

The Akiles Roll-@-Blade 3615 36" rotary cutter is a high-precision trimmer featuring an ergonomic blade carriage and a self-sharpening tungsten steel alloy blade. Designed with two sliding poles give the Roll-@-Blade exceptional stability and cutting accuracy. It comes with a extra-large work area measuring 15" wide with a printed grid with both metric and standard rulers for easy alignment of your work material. The Roll-@-Blade 36" also features a transparent clamping bar for added visibility when cutting.

Take your paper cutting to the next level with the Akiles Roll@Blade 64. This durable paper cutter is designed to last you for years and includes a self-sharpening tungsten steel blade. The Roll@Blade 64 includes a waste catcher and a stand, something not found in many comparable cutters.

Its independent heat and motor control system allows it to be left on stand-by (heat ready) for hours at a time without depreciating the motor, yet you can instantly re-start laminating. The Akiles Pro-Lam 100 is a high-quality, high-volume pouch laminator. This laminator has a four-inch width and is ideal for use with certificates, reports, luggage tags, business cards, ID cards and more. The four-roller lamination system provides a clear, professional finish.

This laminator has steel gears for strength and durability and four-rollers for precise lamination. The Akiles Ultralam 250 laminator is built with quality in mind. The Ultralam 250 has two separate switches for the motor and the temperature, allowing laminator to be left on stand-by (heat ready) for many hours and still instantly re-start laminating when needed. This laminator is able to laminate all standard pouches of various thickness, composition or melting point. The Ultralam 250 is great for use with ID cards, luggage tags, business cards, certificates, letters and cards.

The Akiles Pro-Lam 230 pouch laminator has a heavy-duty motor, metal gears, silicone rollers, a metal cover and extruded aluminum heat plates. Its independent heat and motor control system, allow it to be left on stand-by (heat ready) for hours at a time, without depreciating the motor, yet you can instantly re-start laminating. The four-roller lamination system provides a clear, professional finish.

The Akiles Pro-Lam 320 has a heavy-duty motor, metal gears, silicone rollers, a metal cover and extruded aluminum heat plates. Its independent heat and motor control system, allow it to be left on stand-by (heat ready) for hours at a time, without depreciating the motor, yet you can instantly re-start laminating. The four-roller lamination system provides a clear, professional finish. The Akiles Pro-Lam 320 has a 12 ½" lamination width and can laminate a pouch up to 10-mil thick.

Pouch lamination has never been easier with the Akiles ProLam Plus 330 laminator. It is compact, fits on any table and can be used by anyone.

Professionally laminate photographs and other materials with your own professional Akiles Pro-Lam Photo laminator. This laminator can be used with confidence for laminating photographs and other sensitive documents.

The Akiles Diamond-1 corner rounder is an effective and quick way to cut corners off of paper. This paper cutter can work with a stack of paper up to 0.4-inches thick. Several different cutting dies are available for different radii. Radius sizes range from 1/8-inch to 3/8-inch. This corner cutter is very easy to use, easy to change the die and requires little training.

In order to make large volumes of documents with round corners, the Akiles Diamond 5 is one of the best options. Make professional looking presentations and booklets on a large scale.

The RubiCoil coil binding machine is an excellent entry-level spiral binderA few of the features the RubiCoil has are hardened Steel Dies for a clean and precise punch every time, side margin guide to evenly center the document and a "U" shaped handle that maximizes punching strength, for effortless perforation.

The CoilMac-M is a well-built manual coil punch. This machine includes five disengaging punches that allow for precise punching. A side margin control allows you to punch deeper into paper, preventing documents from tearing out of bound books. Once coils have been inserted into the paper, coil crimping pliers must be used to cut excess coil and prevent the coil from unwinding.

The Akiles CoilMac-M Plus coil binding machine is very convenient, compact and easy to use. It keeps things running smoothly. This machine is tough, made from metal components. Akiles makes machines designed to last for years on end. All 54 of the punching dies can be disabled, eliminating half-punched holes and making it easier to bind odd-sized documents. The CoilMac-M Plus also punches oval-shaped holes, which are easer for inserting the spiral binding elements.

The affordable Akiles Finish-@-Coil M has an electric motor that quickly spins coils through pre-punched holes. A see-through compartment holds coil crimping pliers that can be used to cut and crimp excess coil. This machine is compact and very easy to use.

Keep your spiral binding operations quick and simple with the CoilMac-ER Plus coil binding machine from Akiles. This machine is durable and made from solid metal parts. All 54 of the punching dies can be disabled, eliminating half-punched holes and making it easier to bind odd-sized documents.

Quickly and effortlessly coil bind documents, reports and more with the CoilMac-ECI spiral binding machine. The CoilMac-ECI not only punches up to 17 sheets of paper at a time, but it also has a built-in coil inserter. Most models in this price range require that you insert coils by hand. The CoilMac-ECI has five disengaging dies that allow for more precise binding.

Speed up your spiral binding work with the Akiles Finish-@-Coil E1 spiral inserter and crimper. This machine is great for medium to high-volume work. This machine quickly spins the spirals through the punched holes in seconds, after which it crimps off excess coil, preventing the spines from spinning back out.

Need some extra space or simply don't want to buy two different machines for comb and coil binding? The Akiles DuoMac C51 or C41 is the perfect solution. This binding machine combines both comb binding and coil binding in one machine! This machine saves space, by eliminating the need for two machines, and is very easy to use.

Finding a binding machine capable of punching and binding both wire and coil is very uncommon, but the Akiles DuoMac 521 and 421 does this very well. These machines will save you time, space and money simply by eliminating the need for a second machine. Both machines can punch and bind 2:1 pitch wire. The 521 handles 5:1 coil hole patterns and the 421 handles 4:1 coil hole patterns.

Save yourself time, space and money by getting a single machine for your coil and wire binding needs. The new Akiles Duomac 531 and 431 are multi-format binding machines. Both can punch and bind 3:1 pitch wire. The 531 handles 5:1 coil hole patterns and the 431 handles 4:1 coil hole patterns.

Eliminate the need to use two different coil-binding machines by using the dual format DuoMac 541 from Akiles. This high-quality machine can punch holes for both 5:1 and 4:1 coil.

The Akiles CoilMac-ECI just got better with the introduction of the CoilMac-ECI Plus! This machine is easy to use, highly durable and continues the quality line and history Akiles offers. This machine punches and inserts coils. Unlike other comparable models. The CoilMac-ECI plus punches oval-shaped holes in a 4:1 pitch, which can increase coil insertion time by up to 50%!

Punch coil, wire and comb binding hole patterns in paper in just seconds with the new Akiles FlexiPunch-E. This book binding punch does it all. Thanks to an interchangeable punching die, holes can be punched for wire and later have a new die inserted to punch coil or comb! This 51 pound machine is built tough for constant binding operations. It has a food pedal for hands-free use and even features disengageable dies.

Quickly cut and crimp coils for coil binding in seconds with the Akiles Crimp@Coil. This new machine from Akiles is very easy to use and simple to set up. It will dramatically speed up your binding operations. This can be used in conjunction with almost any coil-binding machine.

Give your reports and books a professional look with the easy-to-use Akiles CoilMac EPI coil binding machine.

This Akiles CoilMac-EPI is easy to use, highly durable and continues the quality line and history Akiles offers. This machine, by means of an electric motor, punches and inserts coils in a matter of seconds. The CoilMac-EPI plus punches oval-shaped holes in a 4:1 pitch, which can increase coil insertion time by up to 50%! It also has 54 disengageable punching dies!

The EcoBind-C comb binding machine from Akiles is an affordable way to get yourself into a quality, compact and reliable machine. This comb binding machine has it all. It can bind books up to two-inches thick and includes disengageable dies and a selectable punching depth. This machine is ideal for use with letter-size documents. This great looking machine has all the quality Akiles is known for and fits in well with any environment.

If you are binding large amounts of books, or just need a stand alone comb opener, the Akiles CBM650 heavy-duty comb opener is just what you need. This machine can be used as a stand-alone unit or in conjunction with the CombMac-24E, DuoMac and VersaMac. It is also capable of being used by right or left-handed individuals.

The new Akiles AlphaBind-CM comb binding machine is a durable comb binder. It is made from all-metal construction and is designed to be a permanent binding solution, meaning you will be able to use it for years to come. This comb binder is manually operated and can punch up to 25 sheets of paper per pass. It can bind documents up to 8.5 x 11-inches in size.

The MegaBind is a reliable and easy-to-use comb binding machine. With fully disengaging dies, this binding machine gives you the control for precise binding that you need. The MegaBind I features an adjustable side guide which allows you to align the paper for the best punch. This comb binder can bind up to two-inches of paper (425 sheets of standard paper).

The MegaBind II offers comb binding and 19 ring Spiral-O double loop wire binding in 1 machine. The MegaBind II can punch up to 20 sheets at a time.

The WireMac binding machines from Akiles are known for their reliability and easy-of-use. The WireMac Combo is no exception.

The new Akiles DuoMac C31 and C21 are multi-format binding machines. That means the can punch and bind books using two totally different binding formats. This is great for people who want more options in a single binding machine. This eliminates the need to have two different machines. The DuoMac series binding machines are made from solid metal construction and feature disengageable punching pins. Buy yours today!

Need some extra space or simply don't want to buy two different machines for comb and coil binding? The Akiles DuoMac C51 or C41 is the perfect solution. This binding machine combines both comb binding and coil binding in one machine! This machine saves space, by eliminating the need for two machines, and is very easy to use.

Punch coil, wire and comb binding hole patterns in paper in just seconds with the new Akiles FlexiPunch-E. This book binding punch does it all. Thanks to an interchangeable punching die, holes can be punched for wire and later have a new die inserted to punch coil or comb! This 51 pound machine is built tough for constant binding operations. It has a food pedal for hands-free use and even features disengageable dies.

MegaBind-1E includes many convenient features such as adjustable margin depth, disengaging die pins, side margin control and more.

The Akiles CombMac-24E binding machine includes everything you need to bind a book except the paper and combs. It is very easy to set up and can be used by anyone.

Akiles is well known for their high quality binding machines .The new Akiles VersaMac is no exception. This durable binding punch is capable of punch up to 55 sheets (depending on the hole pattern) at one time with it's electric-powered motor. It uses interchanging punching dies. This means you can three-hole-punch, swap out the die and begin comb punching. A wide variety of punching dies are available, including comb, wire, coil and VeloBind.

With the option of either 2:1 pitch (2 holes per inch) or 3:1 pitch (3 holes per inch) binding, the OffiWire can fill your wire binding needs inexpensively.

The MegaBind II offers comb binding and 19 ring Spiral-O double loop wire binding in 1 machine. The MegaBind II can punch up to 20 sheets at a time.

The WireMac manual punch and wire binder comes in either a 2:1 (2 holes per inch) or 3:1 (3 holes per inch) model. The two handle design improves wire binding efficiency. Independantly disengaging dies prevent half punched holes and allow precise punching every time.

The new WireMac-Duo takes the best features of 2:1 (two holes per inch) and 3:1 (three holes per inch) pitch wire binding and combines them in one single machine. In the past, you had to pick which method of wire binding to go with. The WireMac gives you both.

The WireMac binding machines from Akiles are known for their reliability and easy-of-use. The WireMac Combo is no exception.

The new Akiles DuoMac C31 and C21 are multi-format binding machines. That means the can punch and bind books using two totally different binding formats. This is great for people who want more options in a single binding machine. This eliminates the need to have two different machines. The DuoMac series binding machines are made from solid metal construction and feature disengageable punching pins. Buy yours today!

Finding a binding machine capable of punching and binding both wire and coil is very uncommon, but the Akiles DuoMac 521 and 421 does this very well. These machines will save you time, space and money simply by eliminating the need for a second machine. Both machines can punch and bind 2:1 pitch wire. The 521 handles 5:1 coil hole patterns and the 421 handles 4:1 coil hole patterns.

Save yourself time, space and money by getting a single machine for your coil and wire binding needs. The new Akiles Duomac 531 and 431 are multi-format binding machines. Both can punch and bind 3:1 pitch wire. The 531 handles 5:1 coil hole patterns and the 431 handles 4:1 coil hole patterns.

Punch coil, wire and comb binding hole patterns in paper in just seconds with the new Akiles FlexiPunch-E. This book binding punch does it all. Thanks to an interchangeable punching die, holes can be punched for wire and later have a new die inserted to punch coil or comb! This 51 pound machine is built tough for constant binding operations. It has a food pedal for hands-free use and even features disengageable dies.

Quickly create professionally bound documents, reports and more with the easy-to-use Akiles WireMac-E.

Keep binding machines, laminators and other office equipment organized and mobile with the Akiles Utility Station.

The Akiles workstation is designed to keep binding elements, lamination pouches and more organized.