| Ledco Educator 25" School Laminator |


|
- Value packed 25" wide lamination.
- Easy lamination film loading.
- Easily adjustable lamination temperature.
- Reverse switch helps to avoid problems and clear lamination mis-feeds.
- Cooling fan for up to 5 mil lamination film.
 | From $1,988
Free Shipping! |
|
| Premier 4 Roll Laminator by Ledco |


|
- Variable lamination speed up to 10 feet per minute.
- Digital thermometer and temperature control. Simple controls.
- Built-in slitters trim off lamination film edges which reduces trimming time.
- Glitch-proof lamination film threading. Forced air cooling.
- This laminating machine has a more effective cooling system than any other machine in its class.
 | From $3,270
Free Shipping! |
|
| Pre-Master Cold Laminator by Ledco |

|
- Factory Training Available ($1,400 per day plus expenses).
- A scrap rewind.
- Variable speed motor. Roller bearings.
- Non-ferrous feed tray.
- Interchangeable rubber rollers.
 | From $3,747
Free Shipping! |
|
|
| Econocraft 44-Inch Laminator by Ledco |

|
- Scrap rewind with an adjustable clutch to take up the release liner found on many pressure-sensitive films.
- Supply roll tension knobs apply tension to the film or tape being applied to eliminate wrinkles.
- Variable-speed motor operation enables operators to apply different materials to different substrates.
- Reverse drive switch enables operators to back material out of the laminating rollers or correct material wraparound.
- Foot switch to free hands to align and feed work.
 | From $10,561
Free Shipping! |
|
| Econocraft Cold Laminator by Ledco |


|
- A scrap rewind. Safety shield. Roller bearings. Variable speed motor.
- Interchangeable rubber rollers. Non-ferrous feed tray. Supply roll tension knobs.
- Reverse drive switch. Manufactured in the USA.
- Foot pedal. Stand.
- Factory Training Available ($1,400 per day plus expenses).
 | From $10,788
Free Shipping! |
|
| Ledco Signmaster 44 Laminator |

|
- Maximum Lamination Width : 44"
- Speed : 1-25 feet/min.
- Supply Roll Core Size : 3"
- Measurements : 64" L x 34" W x 51" H
- Item Number : ESIGNMASTERLAMR,
 | $10,788
|
|
| Ledco Digital 42 Roll Laminator & Mounter |


|
- Two sets of rollers keep laminating film flat and tight.
- Independent temperature controls for top and bottom heaters.
- Aluminum stand included.
- Swing away heaters make cleaning laminating rollers a cinch.
- Don't forget your lamination film!
 | From $17,556
Free Shipping! |
|
|
|
| Ledco Digital 60 Roll Laminator & Mounter |


|
- Two sets of laminating rollers keep film flat.
- Variable speed to allow for different lamination film thicknesses.
- Stand. Large feed tray handles big graphics.
- Made in U.S.A.
- Please note: Two sided lamination requires TWO rolls of lamination film.
 | From $20,861
Free Shipping! |
|
| Ledco HD 38 Commercial Roll Laminator |

|
- Maximum Lamination Width : 38"
- Speed : 0-35 FPM
- Supply Roll Core Size : 3"
- Power Requirements : 220 Volt, 8800 Watts, 40 Amps
- Measurements : 60" L x 58" H x 40" D
 | $31,728
|
|
| Ledco HD 60 Commercial Roll Laminator |

|
- Maximum Lamination Width : 60"
- Speed : 0-35 FPM
- Supply Roll Core Size : 3"
- Power Requirements : 220 Volt, 11000 Watts, 50 Amps
- Measurements : 78" L x 58" H x 40" D
 | $38,564
|
|