|
| Shoplifting Prevention Systems
|
|

Single Panel Shoplift Prevention System |
This Ketec system is the single panel transceiver. The system functions in nearly the same way as the standard RF systems, but at a wider aisle width and requires only one antenna to operate. This system can detect tags within 5 feet on either side of a single panel and if two panels are used, an opening as wide as 20 feet can be protected. Another advantage of the single panel system is that electronics do not have to be synchronized, which minimizes installation time and after sales service. |
5' on either side |
|


Challenger Shoplift Prevention System |
The Challenger allows for multiple styles with the system to match or blend into nearly any merchandising concept while still presenting a strong physical deterrent to shoplifting. |
5' |
|

Commander Shoplift Prevention System |
These panels detect specially protected merchandise that may leave the store without being checked out properly. Standard RF systems can detect up to 5 feet between panels depending on the tag or label in use. These systems are compatible with most RF tags and labels. |
5' |
|

Classic Shoplift Prevention System |
These panels detect specially protected merchandise that may leave the store without being checked out properly. Standard RF systems can detect up to 5 feet between panels depending on the tag or label in use. These systems are compatible with most RF tags and labels. |
5' |
|

Vector Shoplift Prevention System |
This is the latest system designed by Ketec. It is a transceiver system and requires only one antenna to make it work. This system can detect both hard tags (up to 5 feet on either side of the antenna) and labels (up to 3 feet on either side of the antenna). These systems require no synchronization (hard wiring) between systems nor do they require synchronization to our deactivators. This significantly reduces installation time as well as after sales service. |
5' on either side |
|


Clear Vector Shoplift Prevention System |
This system combines the function of the Vector system with the looks of the Elite system. This system was specifically designed for the boutique market where form and function are a minimum requirement. It is a transceiver system and requires only one antenna to make it work |
5' on either side |
|


Elite Shoplift Prevention System |
This system is possibly the most attractive and fully functional new EAS system on the market today. It's transparent antenna doesn't obstruct the merchandising scheme of the store, yet ads a touch of class and sophistication to the store entrance. |
6' |
|
| Labels for Shoplift Prevention Systems
|
|

|

1.5" Barcode Label |
1.5" Barcode Label, 8.2 MHz. (1000 per roll) |
8.2 MHz. |
1000 |
|

1.5" Plain Label |
1.5" Plain Label, 8.2 MHz. (1000 per roll) |
8.2 MHz. |
1000 |
|

2" Barcode Labels |
2" Barcode Labels, 8.2 MHz (1000 per roll) |
8.2 MHz |
1000 |
|

2" Plain Labels |
2" Plain Labels, 8.2 MHz (1000 per roll) |
8.2 MHz |
1000 |
|
| Hard Tags for Shoplift Prevention Systems
|
|

|

Standard Hard Tags |
Standard Hard Tags, 8.2 MHz (500 per box) |
8.2 MHz |
500 |
|

Standard Hard Tags |
Standard Hard Tags, 4.6 MHz (500 per box) |
4.6 MHz |
500 |
|
| Mini Hard Tags |
Mini Hard Tags, 4.6 MHz (500 per box) |
4.6 MHz |
500 |
|
| Mini Hard Tags |
Mini Hard Tags, 8.2 MHz (500 per box) |
8.2 MHz |
500 |
|
| Accessories
|
|

|

Pins for Shoplift Prevention Tags |
These sturdy pins fasten Ketec hard tags to merchandise. (500 per box) |
|

Lanyards for Shoplift Prevention Tags |
Used with Ketec hard tags, lanyards protect merchandise which otherwise could not be protected. Some examples are: tennis rackets, stereo equipment, hardware items, and sporting goods. (100 per pack) |
|
| Power Supply |
120 VAC / 18 VAC Power Supply |
|

Detacher for Shoplift Prevention Tags |
The attractive round chrome detacher allows for quick and easy removal of hard tags from merchandise. Its small size fits easily on even the busiest checkout counter. |
|

K2K Deactivator |
This non-contact deactivator contains the electronics in a separate chassis enable the use of two deactivation pads per one chassis and is universally compatible with any RF security system. |
|
|
|