General Questions:
· What are the advantages of cold lamination over heat laminators?
· What is the advantage of the Xyron™ system?
· Which side of the machine is the front (where a document is loaded)?
· What is the maximum size document that you can process with the Xyron systems?
· How much do the Xyron dispensers weigh?
· Is there a safety concern with the cut blade?
· Are either the Xyron 850 or 1200 systems available in a motorized version?
· What is included with the purchase of an 850 or 1200 unit (are supplies included)?
· Is it easy to change cartridges in the Xyron 850?
· Can I reorder a cut blade?
· Are there any adverse effects with thermal paper, specialty papers, printer/copier papers or photos?
· How often do I need to clean the machine idler bars and cut blades?
Supply Questions:
· What are some of the applications for the Xyron systems?
· Does the length specification refer to total feet output or feet per roll? As an example, do you get 100’ from the DL201-100 or only 50’?
· Do I throw away the complete cartridge housing? Or can I send it back for recycling/rebate?
· How can I tell when I am close to the end of a roll?
· How should I store the cartridges and roll sets?
· Are the laminates or mounting adhesives archival?
Lamination Questions:
· How thick is the standard laminate?
· Is there a thicker or a more rigid laminate available?
· What material is the laminate?
· Are other finishes available (i.e. satin, matte, etc.) or is the laminate available in different colors?
· Is the standard laminate acid free?
· Will the laminate block UV light?
· How strong is the laminate adhesive (i.e. will I be able to peel off the laminate, especially after cutting the laminate)?
· Over what temperature ranges can the laminate be applied?
· Can I stick an AT backed item onto a laminated item?
· Can you write on the laminate?
AT Cartridge Questions:
· Is the AT adhesive permanent?
· If I use the AT cartridge to stick an item onto clothing is it permanent?
· What is the difference between the low-tack and the high-tack?
LAT Cartridge Questions:
· If I stick a banner to a window will it be removable? How about a wall?
General Questions:
What are the advantages of cold lamination over heat laminators?
Heat sensitive papers, photos, flowers, embossed art, and most other items that traditional laminators can not process can be done safely with the two Xyron™ dispensers. In addition, the Xyron dispensers are always ready-to-use.
What is the advantage of the Xyron™ system?
The Xyron™ 850, and 1200 are versatile, fast, easy to use and safe for kids. Both dispensers operate without heat, electricity, or solvents and will not damage heat-sensitive items such as flowers and photographs. Unlike traditional laminators, Xyron laminates throughout the item. Cutting near or through the laminated item will not affect the seal. Other advantages include the ability to apply adhesive or laminate items of any length, laminate without bubbling, and apply adhesive without oozing or blotting through the item.
Which side of the machine is the front (where a document is loaded)?
The front of the machine is the side in which the tray is attached and the document is inserted. This applies to both the Xyron 850, and 1200 systems.
Is there a safety concern with the cut blade?
No, the tip is blunt on all of the Xyron systems.
Are either the Xyron 850, or 1200 systems available in a motorized version?
No.
What is included with the purchase of an 850, or 1200 unit (are supplies included)?
A 25 foot lamination cartridge is included with each the 850. There is also a combo-pack available for the 850 which includes a 25 foot adhesive cartridge and a "how to" book in addition to the 25 foot DL cartridge.
Is it easy to change cartridges in the Xyron 850?
Yes! Simply attach the cartridge feeder to the cartridge and install the cartridge into the machines. When done correctly, the film should be aligned and wrinkle free within 6-12 inches (15.2 to 30.5 cm). Xyron includes at least 2 feet (61cm) of material free of charge with each cartridge to make up for waste when installing the cartridge for the first time.
Can I reorder a cut blade?
Yes, but under normal use the blade should last thousands of cuts. Periodic cleaning will help to extend the blade life.
Are there any adverse effects with thermal paper, specialty papers, printer/copier papers or photos?
No. The Xyron supplies are compatible with all types of printed media. However we do not advise laminating or applying adhesive to any one-of-a-kind items as both the laminate and mounting adhesives are permanent. We recommend making copies of photos and other items prior to processing.
How often do I need to clean the machine idler bars and cut blades?
The answer depends on the amount of use and how the machine is being used. Under normal conditions, cleaning will be required every couple of months. For cleaning instructions, refer to the user manual
What is the maximum size document that you can process with the Xyron systems?
| | Xyron 850 | Xyron 1200 |
| Document width | 8.5" (21.6 cm) | 12" (30.5 cm) |
| Document length - lamination supplies | 100' (30.5 m) | 100' (30.5 m) |
| Document length - adhesive supplies | 50' (15.2 m) | 50' (15.2 m) |
| Maximum document thickness | 0.10" (.25 cm) 3/16" | 0.10" (.25 cm) |
How much do the Xyron dispensers weigh?
| | Xyron 850 | Xyron 1200 |
| Approximate machine weight | 10 lbs. (4.5 kg) | 7 lbs. |
Supply Questions:
What are some of the applications for the Xyron systems?
The possibilities for the Xyron system are endless. We can not begin to list the many ways people are using the different cartridges but a sampling is as follows:
· Lamination- Two Sided (DL) - bookmarks, photos and id cards, book protectors, menus, maps, wall calendars, recipe cards, instruction sheets, banners.
· Laminations with Adhesive Transfer (LAT) - custom shipping labels, bumper stickers, posters, door/window signs, political badges, machinery maintenance & lockout labels, real estate posting, rubber stamp trading pins, art mounting to foam core, photo frames.
· Single-Sided Lamination (SL) - Book protectors, postcards, brochures
· Adhesive Transfer (AT) - Mailing labels, temporary badges, map mounting,
· Temporary badges, stickers from almost anything including fabrics, plants & flowers, metal photos and much more.
Does the length specification refer to total feet output or feet per roll? As an example, do you get 100’ from the DL201-100 or only 50’?
The length specification refers to the total number of feet of output. A DL201-100 has 100 useable feet.
Do I throw away the complete cartridge housing? Or can I send it back for recycling/rebate?
The housing and the cores can either be disposed or recycled. If recycling, check the symbol on the housing and contact your local municipality for further instructions.
How can I tell when I am close to the end of a roll?
An end of roll marker is being developed but in the interim either look or feel the roll.
How should I store the cartridges and roll sets?
Whenever possible, we recommend the cartridges and roll sets be stored at room temperature (approximately 70°F, 21°C) in their original packaging. Maximum temperature is 150°F (65°C).
Are the laminates or mounting adhesives archival?
No they are not. In order to be archival, the adhesives and laminates must be reversible. This means the adhesives and laminates can be removed at a later without damage to the original. The Xyron adhesives and laminates are permanent meaning once applied, they can not easily be removed. In most instances, the item will be damaged if the laminate is removed or if the mounted piece is lifted. Xyron recommends that you do not laminate or apply adhesives to expensive or one of a kind items.
Lamination Questions:
How thick is the standard laminate?
Approximately 2.5 mil per side.
Is there a thicker or a more rigid laminate available?
Not at this time. By simply using thicker paper you can make your output feel more rigid.
What material is the laminate?
The standard laminate film is made of polypropylene.
Are other finishes available (i.e. satin, matte, etc.) or is the laminate available in different colors?
No, not at this time.
Is the standard laminate acid free?
No it is not. However the standard laminate has passed the photo activity test which indicates it is safe to use on photographs. However we recommend that one of a kind items not be laminated because the laminate will be permanent and can not be removed without destroying the original.
Will the laminate block UV light?
No. There are additives in the film and adhesive system that counteract the effects UV light has on the adhesive (such as yellowing). However the laminate will not block UV rays and we can not guarantee your image will not fade.
How strong is the laminate adhesive (i.e. will I be able to peel off the laminate, especially after cutting the laminate)?
No. The adhesive will bond strongly to most substrates. Because the bond is across the entire surface of the document, an edge seal can be beneficial but is not necessary. This is an advantage over heat laminated materials.
Over what temperature ranges can the laminate be applied?
The laminates will perform best when both the laminate and the substrate are applied at room temperature. If a cartridge is brought in from the cold, allow the cartridge acclimate to room temperature. The cartridge will be ready to use when the condensation has evaporated.
Can I stick an AT backed item onto a laminated item?
Yes but there is a trick. Rub alcohol on the area where you wish to adhere the item before sticking down. The alcohol will remove the coating on the topside of the film allowing the adhesive to stick.
Can you write on the laminate?
Yes, with most dry-erase markers and some other markers. If using dry erase markers, white board cleaner will help to remove any residual ink that does not wipe off easily.
AT Cartridge Questions:
Is the AT adhesive permanent?
Yes, the AT adhesive is permanent on most materials. The bond for both the low tack and high tack adhesives will become stronger with time.
If I use the AT cartridge to stick an item onto clothing is it permanent?
Sometimes depending on the material. For instance, it may be permanent on suede and silk. We advise doing a test of the material.
What is the difference between the low-tack and the high-tack?
Both adhesives are permanent. The high-tack adhesive is permanent immediately while the low-tack allows for some repositioning for a limited time before becoming permanent. Generally you can reposition the low tack adhesive before it is burnished.
LAT Cartridge Questions:
If I stick a banner to a window will it be removable? How about a wall?
It depends on the original material of the banner. Paper generally will not be removable while vinyl often can be removed. In many instances, adhesive residue may be left behind.
The adhesive transfer both AT and LAT is not recommended for painted surfaces.
|
